News
GM5Ei Output Module Introduction
GM5Ei output module is an
output module with broadcast signal switching function which is designed specifically for
various use environment.
The start and stop signal
sent by the controller can control the action of the field output module
through the alarm bus. If it is started, the corresponding broadcast signal is switched to the
passive device (horn) by the module.
The GM5Ei output module
can transmit the normal monitoring and fault signals to the alarm bus, which transmits the
signals in the mode of switching quantity and the relay contact switching output. The module has
the function of line break and short circuit fault detection.
Product Features:
Low power consumption. The T+, T-alarm bus and the DC24V power bus are non-polar designs and can
be regarded as the same fire detector connecting to the alarm buswhich is convenient for
construction and flexible in use.
It can be used as the linkage control execution component of the controller and the controlled
device, and can also detect the disconnection and short-circuit fault signals of the playback
device (speaker) and the connection line.
The relay outputs two pairs of normally open and normally closed transition contacts
(AC125V/1A), which can switch background music signals and fire broadcast signals.
Technical standard |
Meet the requirements of GB 16806-2006 |
Operation Voltage |
DC18~26V |
Monitor current |
Alarm Bus (T+, T-) ≤ 390uA |
Alarm current |
Alarm Bus (T+, T-) ≤ 2.6mA |
Confirmation lamp (red) |
Run/input action lights
(red): |
Line system |
Two alarm buses: T+, T- (with
polarity), |
Contact capacity |
DC24V 2A (AC125V 1A) |
Number of contacts |
2 pairs of normally open, normally closed contact synchronous conversion |
Operating temperature |
-10℃~+55℃ |
Relative humidity |
≤95% |
Dimensions |
85mm×34mm×120mm(L×W×H) |
Weight |
About 220g |
Color |
White |
Besqo Marine offers a wide range of Fire Alarm System. For more information , leave message or send an email to sales@skyonboard.com.